Twofer on the track and road

One run already done

Today's runs: 3.5 miles (track), 1 mile (street) = 4.5 miles

For some reason my Garmin has stopped recording my stride length. It used to show up under "cadence" but it's no longer there. A search of the web yielded no useful information and Garmin Connect does not mention it in any of its forum posts. I'm disappointed and puzzled why stride length is no longer displayed. It's a useful data point that helps me understand why I'm hitting certain paces (or not). I looked to see if there was a new software update, but apparently I'm current. I sent a note to Garmin support and expect to hear back in one to never days.

My thoughts about running at Stillwell shifted to the track this morning. I felt like doing some mindless running that didn't include the paranoia of tripping on hidden roots or having mountain bikers stealthily coming up behind me on a single track path. It's hard to explain why I find the track so appealing. I think it may have to do with being able to run outside without too much distraction and no crazy drivers.

I had the track to myself until a woman showed up to walk. That was fine and soon another runner appeared. It was a woman who seemed to be moving along well, but somehow I caught and passed her. I was running okay but not all that fast. Just faster than her I guess. I did 14 laps and headed home. Along the way I started regretting keeping it to only 3.5 miles. I decided I'd add another mile when I got home.

Road & Track

Going out for my second run was strange. I was fully "recovered" from my track workout and probably could have repeated the same distance in my neighborhood. I decided I'd keep to the plan and followed a route close to my house. The whole time I felt I was running by remote control, as if I was still at home while my body was out doing the run on its own. That was probably due to being fully warmed up, making the run feel really easy.

After I finished I thought about my experience and realized that the second run probably felt effortless because I knew I only had to cover a mile. I started thinking about a "day of running", where I would run a mile in my neighborhood starting early in the day and come back home. At the top of the next hour (and every hour subsequent to that) I would run another mile. If I did this from 7:00 AM to 4:00 PM I could cover ten miles. If every run was a little longer I could do a half marathon or more.

So if I cover 14 miles in one day, is that the same as doing a 14 mile run? Or would it be cheating to say that?

Unfrozen and back on track

You're pushing it Garmin

Today's run (track): 3.4 miles
Yesterday's run (street): 3.2 miles

It's almost the end of the school year and there's a lot going on. My daughter is graduating from high school on Wednesday and it also happens to be her birthday. With that conflict, we decided to celebrate her birthday today. Due to those plans, I had to get out early for my run. Even with that, I was pressed for time and decided to run laps at the high school.

Last night, after I'd downloaded Friday's run from my Garmin, the watch froze and it wouldn't respond, no matter which buttons I pushed. I tried to shock it back by hooking it up to the USB and then the wall charger. Neither attempt worked, so I left it for the morning. I figured I could run with a stop watch if the Garmin failed to respond.

When I got up, the Garmin was still frozen and I began to entertain the idea of replacing my six year old FR210 with a newer model. Things are starting to break on it and I noticed one side of the wrist band is beginning to separate. Before giving up on it, I looked online and found a video that showed how to unfreeze my watch. It worked.

The track was almost empty when I got there. Just me and a guy who spent a lot of time stretching while I circled the track. I was eventually joined by another runner who circled the track much faster than I did. I was prepared to count the number of times I got lapped but the guy quit after a couple of times around.

Lapping it up

The stretching guy eventually made his way onto the track. He was wearing one of those elevation training masks and started doing intervals. Or should I say, one interval. I ran four more laps before he did his next one. By then I was finished with my workout.

We had a great birthday celebration and I managed to get in a lot of Fitbit steps throughout the day. Tomorrow is Father's Day and I'm going to try to get out early again to maximize celebration time.

What I've learned about running from non-runners

Credit: http://www.runnersworld.com

Today's run (street): 4.5 miles
Yesterday's run (treadmill): 3 miles

Have you ever started a conversation about running with a non-runner and ended up regretting it? Like politics, religion and parenting, running is a subject that generates strong opinions. Generally speaking, most runners -- even those at different ends of the performance scale -- will agree on running related topics. Whether we run seven or eleven minute miles, we all sweat, have to deal with weather and wish we were faster. But discussions with non-runners can sometimes go like this.

Non-Runner: What did you do this weekend"
Runner: I did a couple of long runs on Saturday and Sunday.
NR: Wow. I'll bet your knees are hurting today.
R: Running doesn't hurt your knees. In fact it's been proven that running is good for your knees.
NR: Tell that to my my friend [sibling, spouse, friend of a friend, guy I work with...] who used to run until it ruined their knees.
R: Do you run?
NR: No! I don't want to hurt my knees and besides running is so boring!
R: Nice talking to you.

If you think I'm exaggerating, I had this conversation with someone at work this week. Others have warned me of other potential maladies, including heart attacks. I will say that the majority of conversations I've had with non-runners are positive. I've heard just as many people tell me they admire runners and wished they had the patience or discipline to run themselves.

I haven't been much of a runner this week myself, as my increasingly busy work week has cut into my workout time. I took a vacation day yesterday so I could go out east to the Atlantis Aquarium in Riverhead. We needed to get on the road early and I opted for a treadmill session to save time. Conditions were humid, so I did what I could to move air around the treadmill room. I used the big floor fan and set the built-in fans on the treadmill console to full power.

That helped, but only so much. Although I only covered three miles, it felt like six and I was wishing for a nap on the way to the Aquarium. We had a great time in Riverhead, and Atlantis is always a good experience. After a tough week, it was nice to do our first family activity since the kids began their summer break.

This morning conditions felt more like spring than summer. It was 65° when I went out and the humidity was far lower than on Friday. I've felt ambivalent about my workouts lately, but today everything worked. The air felt cool throughout my entire run and I was pleased with my stride. I've been reading an article excerpted from Meb Keflezighi's new book and tried to do some of the things he recommended to improve to my form. I felt that today's run was one of the best I've done this year.

Scattered thunderstorms are expected to start tonight and continue through most of Sunday. That's disappointing. But you know, weather conditions are just one of the many problems we runners face. I know a few non-runners who would tell you that.

Shallow bins and recovery progress

Usability testing anyone?

Today's workout (elliptical): 40 minutes

I realize that there are many larger problems than this, but can someone please explain to me why the stuff holders on our elliptical and new treadmill are so shallow? I don't get it. Do the designers ever think about the fact that an 8" remote will probably fall out of a 4" deep console bin? This are the sort of things that go through my mind these days as I do my workouts without outdoor distractions.

Yesterday's treadmill run ended with an alarming jolt of pain as I pushed my pace beyond a moderate speed. Rather than signaling a new or deeper problem, I think this experience was a warning. Despite giving the injury plenty of rest, the root cause issue remains. If three weeks of no-impact workouts haven't resolved it, it may be time to see an orthopedist.

Today's workout was all about protecting the problem. Instead of running, I spent 40 minutes on the elliptical and followed that with ten minutes of (very) slow running on the treadmill with a 2.5% incline. It wasn't a particularly challenging workout, but that was the point.

I'll probably go back to a full treadmill workout tomorrow. The elliptical session seemed to reset whatever caused yesterday's pain and I'm feeling better. Just the same, I'll need to keep my speed in check tomorrow to prevent another cycle of pain.

Heat, exhaustion and a failing treadmill

Torture chamber. Why did I wear a sweater?

Today's workout (treadmill): 25 minutes

I spent most of the week in an airless conference room filled with computers that raised the temperature into the intolerable range. We were piloting some new business processes and technologies and I spent a lot of time managing the participants and capturing issues on a whiteboard. The heat, lack of ventilation and fumes from the dry markers wore me out.

This morning I celebrated a return to normal working conditions. I hopped on the treadmill at 3:45 AM and hoped to raise my heart rate and ingest cool air that was devoid of marker solvent. I hadn't run since Sunday and was ready to go. I'm no fan of the treadmill but that didn't bother me today. Once the machine started up I changed my mind about that.

The F63

Our Sole F63 has not lived up to its reputation as a top rated machine. In the four years that we've owned it, we've had to rebuild the motor once, fix multiple problems with a slipping tread belt and replace the display console four times. Despite regular maintenance, our technician told us a few months ago that the treadmill is nearing its end. Based on the cacophony of sound I heard today, I thought the end would come today.

The Sole was never whisper quiet, but compared to the 14 year old Pro-Form unit it replaced, our new machine was nearly silent. Now the F63 is making worse noises than the Pro-Form. The motor has grown increasingly louder and the belt rollers are making sounds like gunshots. The belt also feels like it slips when I increase the speed past a certain point.

I managed to get through my workout, but I'm not sure how many runs are left in the machine. I do 3/4 of my running outside, so I can manage without the treadmill, but my wife does all her running on it. It's going to be cold tomorrow morning, but I'm very much looking forward to a quiet outdoor run.

Numb Runner

Distance lost

Today's run (street): 5.4 miles

Instead of heading out this morning with my running buddies, I was at the dentist having a broken filling repaired. I like to get out as early as possible on my weekend runs, so I can cover longer distances and still have my day. If I scheduled the dentist any later in the morning, the inevitable backups would have taken too much time. That's why I'd asked for the first appointment of the day.

It's been years since I've needed to get a local anesthetic at the dentist, so that was lots of fun (not). My dentist talked to me about Cow Harbor. She lives in Northport and has run the race a couple of times. I told her I'd run it this year if she does. I'm pretty sure I will participate either way, so I can run it with SIOR and TPP. I'm still on the fence about Dirty Sock though.

Since I have so few opportunities to run these days, I knew I had to get out today. The weather was ideal, mostly overcast, with temperatures in the low 70's. One side of my mouth was still unpleasantly numb when I set off from my driveway. Almost immediately after starting, I was flagged down by a man on a bicycle who asked me a question about the neighborhood. I stopped my Garmin while I chatted with him, and thought I'd restarted it once I resumed running.

I had covered about 1.5 miles when it occurred to me that I hadn't heard the one-mile chirp from the Garmin. I looked at my watch and realized that it wasn't recording time or distance. I restarted the timer, figuring I could determine my mileage when I got home by mapping my route with Milemeter. Since I had started off with the Garmin recording my start time, I was able to back into my pace by subtracting the "chat" time from total run duration.

Surprisingly enough, my mouth was still a little numb by the time I got home and that prevented me from having my usual post-run refueling. I did drink about 24 ounces of water to re-hydrate. Within an hour, the numbness had thankfully worn off. Between the dentist and the run, I was fairly wiped out, so that came at a perfect time for lunch. I was glad to get in some decent mileage today. I'm not sure what I'll do tomorrow, because the family has early morning plans. Maybe a 6:00 AM run is in order. That might help prepare me for even earlier workouts on weekdays.

The sad demise of our Sole F63

Anyone want a crappy treadmill with a brand new console?

Today's run (street): 4.4 miles

A treadmill is a substantial thing, a sturdy platform built for running. Treadmills are expensive because they are engineered to hold up over time. A good example of this is our ProForm L15, a modestly priced treadmill that we bought in the mid-1990's. Although it was used daily, the ProForm was a workhorse that served us well until February 2010. A bad example of this is the Sole F63, that has reached the point where replacing its worn parts will cost 70% of a new unit. And not a moment too soon. From what we were told, these parts are in serious need of replacement.

That was the assessment made by our treadmill repair guy whose opinion we trust. Adding to that, we paid $200 a month ago for a new console (the fourth one since we got the unit) and we needed to pay the tech for his house call to get the bad news. What's frustrating about our experience with this treadmill is that we've done all the right things to ensure a good outcome.

I had such high hopes when we got the F63 four years ago. Our due diligence included much research and a personal recommendation of the brand. My wife made sure the unit was professionally serviced and she was meticulous about following owner maintenance. In the short time that we've had it, we've experienced a motor failure, serious issues with tread slippage and the aforementioned console problems.

The treadmill still works, but it makes a huge racket due to the degraded rollers and failing frame. It could go tomorrow or in six months. The question is whether we should invest in a better brand of treadmill. The cost could be substantial, but the value of doing that would be that pro grade treadmills often come with long or even lifetime warranties. Between my wife and I, we use our treadmill a lot.

I'm now at the point in my week where I jam all my running mileage into three days. This morning I went out for the first time since I ran 400's with the Runsketeers on Sunday. The long rest period helped, and I felt great from the start. I wouldn't call today's run effortless, but it was certainly a pleasent experience. The temperature hadn't broken 70° and the sun wasn't too intense at 7:15 AM. If not for business obligations that required me to cut my run short, I would have gone for six miles.

I'm not sure about this weekend's running. A trail run would be fun. I'll see how I feel in the morning. No rain is scheduled for Saturday, so at least I won't be forced to continue torturing our ailing treadmill.

Run, interrupted

Reset, you bet

Today's run (treadmill): 4.5 miles

My son is hosting a competition with his buddies today and our basement is filled with the loud noises and trash talking that you'd expect from a bunch of 9th grade boys. Due to this, our morning schedule was compressed and I strongly considered skipping today's run. Yesterday's snowfall put four additional inches on top of Thursday's accumulation and I shoveled a lot of wet, heavy snow on Saturday. By the time I finished, it was after 10:00 PM.

I mentioned to my wife that I was considering taking a rest day. She suggested that I do an alternative workout, either a walk or an easy run on the treadmill. With that in mind, I got myself situated. I set the speed a little lower than yesterday's and let it go. Things went well, but I felt the tread slip about halfway through the run and then stop. I checked that my safety cord was still in place and there was no power drop. It seemed like the treadmill console had just spontaneously reset.

This reset wiped my distance off the console's display, as well as my elapsed time. I hadn't been looking at my distance when the machine stopped, but I had an approximate idea where it was. Based on the speed I was running, and the time captured on my Garmin, I was able to back into the number. I restarted the treadmill and kept going until I reached a calculated 4.5 miles. From there, I reduced my speed to a fast walking pace and increased the incline to 2% for a half mile cool down.

It was a good decision to run easy today rather than put off my workout until tomorrow. With two days in the city this week that interrupted my workout schedule, I would have fallen very short on mileage. No more snow today, so my upper body is finally getting some rest. Do I dare hope to get an outdoor run in next week? More snow is expected on Tuesday, so I'm thinking that's not likely.

Headlamp failure saved by the treadmill

Light's out

Today's run (treadmill): 4 miles

I spent the day in the city, so I'd planned an early morning run. It's been nine months since the last time I ran in the pre-dawn darkness and, not unexpectedly, my Black Diamond headlamp wasn't working. I put in new batteries but the lamp kept going off, just like my old Petzl unit. I don't understand why it's so hard to make a headlamp with a stable battery housing.

While I wasted time trying to get the lamp to stay on, my daughter told me it was raining outside. Running in the dark, in a mix of rain and snow, was not going to happen. Instead, I got on the treadmill and hammered out 4 miles at a fairly good pace. I worried that I'd pushed too hard, considering all the NYC foot travel I was facing later in the day. I ended up doing fine.

I ended up walking pretty far today and the result was a substantial blister on the bottom of my left foot. I'm hoping it will miraculously heal overnight so I can get out on the road tomorrow (weather permitting).

Fitbit value to be determined.

Planned obsolescence

Today's run (street): 3.3 miles

The best time to value your personal technologies is when they stop working. Do you fix, replace or discard? Years ago, I actually paid money to have my VCR repaired. It was worth it because a functioning VCR was important to me. An issue I'm having with my Fitbit has forced me to decide whether I'm in for a penny or a pound. Actually, 6.2 (British) pounds.

Worn and torn

The thing is, my Fitbit's "belt holster", a spring clip with a rubberized housing, is falling apart. The rubber that protects clothing from the sharp metal clip has ripped and detached. This makes the process of attaching the device to pants or a belt so difficult that I've stopped wearing it. I thought I might write to Fitbit and mention their poor clip design. I figured they'd be horrified and would immediately send me new one for free. When I went to the Fitbit site, I saw that my problem can be solved with the purchase of a replacement holster for $9.95 plus tax and shipping.

I probably won't bother to get it. It's not about the $10+ required to buy a new clip that will likely need to be replaced again in six months. I get that things cost money, though I find it offensive that they make money off their own design flaw. I've discovered that, despite the Fitbit's great features and attributes, I don't really find it that useful anymore.

The excitement of occasionally reaching 15,000 daily steps or 25 flights of stairs is mitigated by the frustration that comes from forgetting to transfer the device between sleepwear, running shorts, and pants. What's the sense of tracking only part of your activities? I'll give it another week to decide between purchasing a new clip or relegating the Fitbit to the technology junk drawer. It comes down to whether the value of the Fitbit is closer to pennies or pounds.

Making my last taper count

A serious threat to pant-kind

Today's run (street): 3.1 miles

As much as I love running, business needs to come first. For that reason, I was unable to get in my workout yesterday. I was in the city all day for meetings so the opportunity for a run didn't surface. I'm temporarily boycotting my Fitbit because the holding clip has deteriorated to the point where I fear it will rip my pants when I wear it. Without it, I don't know how much distance I covered yesterday on foot, but I'm estimating it was between 4 and 5 miles.

Today I had no excuses. Without a commute into the city, I had enough time for one final run before Saturday's 5K. Although I've heard that I need to do weekly speed work in order to avoid embarrassing myself on race day, I think I've prepared well for the race. I decided that a good hard run over three miles would be a nice way to end my taper.

I took off at a brisk pace and tried to maintain that turnover throughout the entire run. The difference between this type of workout and a race centers on two factors: the influence of other runners and the psychology of competing in a timed event. Without those two things, my expectation was to see a very good, but not spectacular performance today.

That's exactly how it came out. I'd kept my heart rate around 85% max and covered the distance in a little over 28 minutes. For me, that was exactly on the mark. I could have pushed harder and dropped my pace into the 8:00 range, but I didn't see any reason to do that. 9:06 was a decent average under the circumstances. I'm making no predictions for Saturday. A lot of it will come down to how I feel on race day morning.

Technology saves an operational goof

XML salvation

Today's run (street): 4.25 miles

I did the unthinkable after finishing my run today and failed to properly stop my Garmin. While I happily traced the driveway on my cool down walk, my Garmin continued to count the seconds, obscuring the actual time I'd finished. By the time I discovered my error, at least a couple of minutes had gone by, so my calculated pace was way off.

I really envy people who tell me they run without a watch or track their performance in any way. I think about how liberating it would be to run without regard to time. Unfortunately, I've never been able to do that. On the plus side, I've compiled an online record of every run that I've done over the last five years. Despite my failure to operate my watch today, I was able to reverse engineer my finish time by reading the XML output file.

The run itself was nothing special, 4.25 miles at around 9:30 a mile. The weather was downright chilly, low 50's with strong winds coming from the northeast. When I wasn't heading directly into the wind, it was extremely pleasant. I had considered doing either a long easy run or a short, faster run and I ended up doing something in the middle. I'm not sure what today's run accomplished or what I'll do tomorrow. But Wednesday's run will be the last one I do before Cow Harbor. I hope that one counts.

Frustration mounts with the ProForm CE 6.0

Hey elliptical, you've gotta screw loose!

Today's workout (elliptical): 25 minutes

Today has been busy. This morning was filled with meetings and this afternoon I presented a technical paper at a W3C conference. I'd had a much different expectation about early retirement. Tomorrow will be even busier. 

This morning I decided to use the new elliptical while my wife ran on the treadmill. It was my second time using the machine and, once again, I was disappointed. I had hoped that this ProForm, that looks a lot like our old X1, would perform in similar way. Aside from the fact that they both provide elliptical motion, the user experience is far opposite.

The difference is in the quality. The X1 had its challenges, but it was a sturdy beast. The ProForm CE 6.0 is a wobbly contraption that squeaks and squeals. The display shows your distance only in revolutions (huh?) and there's no way to pause the timer during a workout.

Why would need to pause the timer? One reason might be that the bolt that attaches the arm to the center post tends to work its way free. I had to jump off the machine this morning at one point and tighten it with an Allen wrench. Lucky for me, I'd removed the decorative plastic collar last week to get to this bolt. I needed to break the collar's connecting tabs when I did that, so it's not going back on.

The rest of my workout went without incident and the bolt stayed in after my mid-session triage. While I consider the CE 6.0 far inferior to the unit it replaced, I still ended up with good workout that got my heart rate to target. It will be back to the treadmill tomorrow. I can't believe I'm saying this, but I'm actually looking forward to using it.

Garmin FR210 behaving badly

Get back to work!

Today's run (treadmill): 25 minutes

After two years of stellar service, my Garmin FR210 has started to exhibit some bad behavior. I bought this watch because it provided basic GPS metrics, elevation data and wireless syncing with my heart rate monitor. Like all GPS systems, the distance accuracy wasn't 100%, but after a while I understood the margin of error and mentally corrected for it. There are things I still don't like about the watch, such as the weird way it connects to a PC for data uploads, but overall it has been a great resource and a good value.

The bad behavior started on January 1st, with my first run of the year. I was a couple of miles into the Hangover Fun Run at Eisenhower Park, when I looked at the watch only to see that it wasn't recording time or distance. I decided to let it go and just use the event clock to record my time. I figured that I must have neglected to fully push the start button and was paying the price for that inattention.

Since then, I've run five more times. On three of those runs I've noticed that the timer stopped recording after I'd initially started it. It doesn't happen every time, but it forces me to pay careful attention to the watch on every run. I don't know why this would suddenly happen. I checked the FR210 forum on Garmin Connect but haven't seen anyone else with the same complaint.

It would be a shame to have to replace this watch because I've come to rely on it to capture all my metrics, including a map of where I'd run. I still have my FR60 that works fine, but it lacks GPS so I'd need to return to using the foot pad. If I did that, I'd lose the mapping but would gain cadence, something I miss since switching from the 60 to the 210. I could always use an app on my smartphone to do the mapping since I carry the phone on every run. It's worth thinking about. But I'd rather have the FR210 working as it should.

From bad to worse and then worse again

Today's run (street): 1.1 miles

Today's workout started badly and got worse. Everything started out fine, I changed into my running clothes and was out the door ahead of schedule. I felt fine as I waited to get my GPS signal, but when I took off I noticed my energy level was a little below par. My legs felt heavy and my stride felt flat. I decided to press on in hopes that I'd loosen up and rebound after the first downhill section.

Instead of feeling better, I began to feel worse and around the half mile point I started to feel queasy. I decided on the spot to run straight home. When I reached my house I discovered that I'd locked myself out for the first time in four years. I had to call my wife to come down and let me in. I'm sure she was alarmed when the phone rang at 4:00 AM, but at least it wasn't because of anything bad. Of all days to do that.

As a result, I'm going into the weekend a little short of my targeted mileage, but I hope to make that up tomorrow. My plan is to run the big hill at Bethpage a few times to prepare for the race the following weekend. I recovered quickly from this morning's incident and I'm hoping to feel much better on tomorrow's run.

Sole treadmill slippage, once again

Today's run (treadmill): 40 minutes

Happy 4th of July. I keep forgetting that today is Wednesday because it feels so much like a Saturday. I'll feel differently tomorrow when I'm standing on the the train platform at 6:15 AM. But this morning I had the pleasure of sleeping in until that time.

The weather is alternating between sun and rain this morning. I'd hoped the skies would clear long enough for me to get outside for a run, but the rain was coming down too hard. Instead, I positioned the stand up fan that's in front of the treadmill and started my indoor run. I forgot to bring my iPad home from the office last night, so I didn't have the Virtually Active app to distract me. I had to make due with the scene out the window.

Our Sole F63 treadmill has been a disappointment in the two years since we bought it. We've replaced a lot of the components under warranty, but the labor costs have made this unit far less than a bargain. We are, once again, experiencing tread belt slippage and this is both disconcerting and borderline dangerous. Our low end Pro-Form treadmill gave us over a decade of trouble-free service. It's too bad that this highly rated Sole continues to experience chronic problems.

The slipping belt seemed to settle down after a few minutes of running, but it returned for short periods when I upped my speed. I ran about 40 minutes and was happy to come to the end. The AC and fan both helped against the high humidity, but it was still a soaking run. I'm glad to have completed a decent workout early enough to enjoy the rest of the holiday. The sun has returned, so today's outdoor activities will probably include a little time in the pool.

Gear gremlins and going gloveless

A great headlamp when it works

Today's run (street): 2.5 miles

My Petzl headlamp has served me well over the years but this morning I was ready to toss it into the trash. This unit (Tikka Plus) is extremely lightweight and I often forget that I'm even wearing it. But the light weight comes at the cost of fragility. The plastic assembly doesn't secure the three AAA batteries in position very well and slight movements will occasionally disrupt the connection and cause the lamp to go dark. This morning it took me over five minutes to get it operational, time that's much too precious to waste in the morning.

Once I was confident that the lamp was working properly I set out for my run in temperatures that felt far colder than the reported 45°. I immediately regretted not having gloves, but I had a long sleeved jersey that I pulled over my hands. That helped a little, but it caused my shirt to bind around my shoulders and I soon abandoned that solution. I'll plan to bring gloves tomorrow unless it truly warms up as expected. The run itself was great and I nearly broke 9:00/mile which is hard for me to do at that early hour.

I'm toying with the thought of running in Central Park tomorrow. It's been a long time since I've done a city run and since Friday's the lead-in to a holiday weekend, my afternoon schedule is light. I'll decide tonight so that I'll have time to pack gear for the morning. If Friday is as cool and bright as today a CP run could be a great pre-weekend workout.

Jerked around by my treadmill

Today's run (treadmill): 2.3 miles at 9:12/mile

The hill work I did over the weekend caused great tightness in my leg muscles on Monday. This morning that tightness was even more pronounced so I decided that the "hair of the dog" approach with more hill climbs would be the best way to deal with it. I had played briefly with the inclines on the new treadmill on Saturday and thought about running one of the built-in programs that included variable elevations. I had not read the treadmill's instructions to learn how to start a speed or elevation program so after a few tries I gave up and used the manual method to set my inclines. A few minutes into my run I began noticing that the tread belt slipped every twenty seconds or so. These slips felt as though the belt was jerking and suddenly pulling forward for a second. It wasn't so pronounced that it threw me off balance but it was concerning. The worst part was waiting for the next slip - nothing like feeling stress while running!

I decided to finish my run despite this annoying problem. I found the incline feature useful and varied the incline between 2% and 4% but backed off on that when the belt slippage became pronounced. The slipping and jerking may be related to inclines because it had not happened before I had used that feature. Unfortunately the slipping happens without an incline so there's no safe condition although it seems to stabilize when the speed is lessened. I sent a note to Sole and I'll report on what happens. It's really too bad, prior to this problem I thought the F63 exceeded expectations.